English
中文简体YDT series three-phase consequent-poles asynchronous motor Custom
Home / Products / Three-phase Asynchronous Motor / YDT Series / YDT series three-phase consequent-poles asynchronous motor
Product overview
Among series YDT motors, the pole-and speed-changing 3-phase asynchronousmotor specially matched for the load of fanblowers or pumps is an outgrowth fromseries Y motors.
The series motors are novel in design their rotational speed will decrease by deg-rees of quadratic relation with the increase in the load of fanblowers or pumps, their torque properties: the power of motor is directly proportional to the quadrate of rotational speed Due to it that they can reasonably match the corresponding power according to the complemental requirement of rotational speed, they can save a lot of energy, therefore may be rated as an ideal dynamic force for the fanblowers of load type they are widely used in metallurgy, mining, textile, dyeing, chemical industry, light industry, architecture, civil facilities and other departments virtues of high efficiency, saving energy, low noise, little vibration, fine isolation reliable operation easy maintenance, etc.
Series YDT motors conform to the international standards of IEC, Their main qualifications have reached the advanced standard among the same products both at home and abroad.
This company produces series YDT motors strictly according to the atandards of JB/T8681 -1998.
Type defignations
Y Asynchronous motor
D Speed
T Load of fanblowers or pumps
250 Frame size
M Frame no. S-Short、M-Medium、L-Long
-6/8 ploes
Serice condition
1 、Ambient temperature:to be altered with the change of seasons but do not exceed40℃
2、Altitude:to be used lower than 1,000 meters above sea level.
3、Rated frenquency:50HZ
4、Rated voltage:380V
5、Duty:continuous(s1)
6、Metod of starting:can be started directly on full voltage for all sizes of motors.
DESIGNATION FOR LEADING -OUT WIRE
|
HIGH SPEED |
MIDDLE SPEED |
LOW SPEED |
APPLICABLE TYPE(POIF NUMBERS) |
|
|
|
|
6/8 4/6 |
|
|
|
|
2/4 4/8 |
|
|
|
|
4/6/8 |
COMPANION FLANGE AND LEADING-OUT TERMINAL
|
VELOCITY RATIO |
SYNCHRONOUS SPEED |
||||
|
1500/1000 |
1000/750 |
3000/1500 |
1500/750 |
1500/1000/750 |
|
|
CONNECTION |
Y/Y |
Y/Y |
2Y/Y |
2Y/Y |
2Y/Y/Y |
|
TERMINAL |
6 |
6 |
6 |
6 |
9 |
Technical date
|
Type |
Output(KW) |
Current (A) |
Speed (r/min) |
Efficiency (%) |
powor Factor (cosΦ) |
Noiseleve DB (A) |
Locked torque Rated torque |
Locked currend Rated currend |
|
YDT80M.-2/4 |
0.75/0.17 |
1.9/0.7 |
2850/1410 |
68.0/58.0 |
0.82/0.60 |
79 |
2.0/1.4 |
7.5/5.5 |
|
YDT80M2-2/4 |
0.95/0.25 |
2.4/0.9 |
2850/1410 |
70.0/64.0 |
0.81/0.65 |
79 |
2.0/1.4 |
7.5/5.5 |
|
YDT90S-2/4 |
1.40/0.30 |
3.6/0.9 |
2810/1430 |
71.0/70.0 |
0.82/0.72 |
79 |
2.0/1.4 |
7.5/5.5 |
|
YDT90U2/4 |
1.90/0.40 |
4.3/1.1 |
2810/1430 |
75.0/72.0 |
0.86/0.73 |
83 |
2,0/1.4 |
7.5/5.5 |
|
YDT100L-2/4 |
2.50/0.65 |
5.3/1.8 |
2890/1420 |
82.0/74.0 |
0.87/0.72 |
83 |
2.0/1.4 |
7.5/5.5 |
|
TDT100L2-2/4 |
3.10/0.80 |
6.4/2.2 |
2890/1420 |
82.0/76.0 |
0.87/0.72 |
87 |
2.0/1.4 |
7.5/5.5 |
|
YDT112M-2/4 |
4.40/1.10 |
9.2/2.5 |
2875/1440 |
82.0/80.0 |
0.88/0.74 |
87 |
2.0/1.4 |
7.5/5.5 |
|
YDT1328-2/4 |
5.90/1.40 |
11.7/3.5 |
2910/1450 |
83.0/80.0 |
0.91/0.74 |
87 |
1.9/1.3 |
7.5/5.5 |
|
YPT132M-2/4 |
8.00/2.00 |
15.3/4.7 |
2910/1450 |
85.0/83.0 |
0.91/0.77 |
91 |
1.9/1.3 |
7.5/5.5 |
|
YDT160M-2/4 |
12.50/2.80 |
24.1/6.6 |
2930/1460 |
86.0/85.0 |
0.91/0.75 |
91 |
1.9/1.3 |
7.5/5.5 |
|
YDT160L-2/4 |
16.50/3.80 |
31.0/8.7 |
2930/1460 |
87.0/86.0 |
0.91/0.76 |
95 |
1.9/1.3 |
7.5/5.5 |
|
YDT90S-4/6 |
1.10/0.32 |
2.9/1.1 |
1400/930 |
70.0/63.0 |
0.78/0.66 |
95 |
1.8/1.6 |
7.0/6.0 |
|
YDT90L-4/6 |
1.40/0.45 |
3.5/1.5 |
1400/930 |
72.0/68.0 |
0.81/0.66 |
75 |
1.8/1.6 |
7.0/6.0 |
|
YDT100Li-4/6 |
2.20/0.70 |
5.312.2 |
1430/945 |
80.0/73.0 |
0.79/0.66 |
75 |
1.8/1.6 |
7.0/6.0 |
|
YDT100U-4/6 |
2.50/0.90 |
6.0/2.9 |
1430/945 |
81.0/74.0 |
0.78/0.67 |
78 |
1.8/1.6 |
7.0/6.0 |
|
YDT112M-4/6 |
3.20/1.10 |
7.1/3.1 |
1440/955 |
82.0/78.0 |
0.82/0.68 |
78 |
1.8/1.6 |
7.0/6.0 |
|
YDT132S-4/6 |
4.70/1.50 |
10.0/4.1 |
1450/970 |
84.0/81.0 |
0.83/0.68 |
82 |
1.8/1.6 |
7.0/6.0 |
|
YDT132M-4/6 |
6.70/2.20 |
13.8/5.7 |
1450/970 |
85.0/83.0 |
0.85/0.69 |
82 |
1.8/1.6 |
7.0/6.0 |
|
YDT160M-4/6 |
9.50/3.10 |
19.3/8.0 |
1455/975 |
87.0/83.0 |
0.84/0.69 |
82 |
1.8/1.6 |
7.5/7.0 |
|
YDT160L-4/6 |
12.00/4.00 |
24.4/10.0 |
1455/975 |
88.0/83.0 |
0.84/0.69 |
86 |
1.8/1.6 |
7.5/7.0 |
|
YDT180M-4/6 |
15.50/5.10 |
29.0/11.5 |
1460/980 |
87.0/81.0 |
0.84/0.72 |
86 |
1.5/1.5 |
7.5/7.0 |
|
YDT180L-4/6 |
18.50/6.20 |
34.3/13.9 |
1460/980 |
87.0/81.0 |
0.85/0.74 |
90 |
1.5/1.5 |
7.5/7.0 |
|
YDT200L-4/B |
26.00/8.70 |
48.2/19.1 |
1465/980 |
88.0/83.0 |
0.85/0.77 |
90 |
1.5/1.5 |
7.5/7.0 |
|
YDT225S-4/6 |
33.00/11.00 |
60.7/24.2 |
1470/980 |
89.0/84.0 |
0.86/0.84 |
92 |
1.5/1.5 |
7.5/70 |
|
YDT225M-4/6 |
39.00/13.00 |
71.3/27.3 |
1470/980 |
90.0/85.0 |
0.86/0.85 |
92 |
1.5/1.5 |
7.5/7.0 |
|
YDT250M-4/6 |
47.00/16.00 |
84.2/32.3 |
1475/985 |
90.0/85.0 |
0.89/0.87 |
92 |
1.5/1.5 |
7.5/7.0 |
|
YDT280S-4/6 |
55.00/18.50 |
99.6/37.3 |
1480/985 |
90 0/85 0 |
0.88/0.86 |
94 |
1.5/1.5 |
7.5/7.0 |
|
YDT280Mi-4/6 |
70.00/25.00 |
125.0/48.4 |
1480/985 |
91.0/87.0 |
0.88/0.87 |
94 |
1.5/1.5 |
7.5/7.0 |
|
YDT280Mz-4/6 |
84.00/28.00 |
150.6/54.8 |
1480/985 |
91.0/87.0 |
0.88/0.87 |
98 |
1.5/1.5 |
7.517.0 |
|
YDT315&4/6 |
95.00/32.00 |
177.4/65.3 |
1485/985 |
91.0/89.0 |
0.86/0.79 |
98 |
1.5/1.5 |
7.517.0 |
|
YDT315M-4/6 |
115.00/38.00 |
217.5/77.9 |
1485/985 |
92.0/90.0 |
0.86/0.78 |
98 |
1.5/1.5 |
7.5/70 |
|
YDT315L-4/6 |
135.00/45.00 |
260.0/90.5 |
1485/985 |
92.0/90.0 |
0.86/0.80 |
100 |
1.5/1.5 |
7.5/7.0 |
|
YDT315U-4/6 |
160.00/55.00 |
294.0/113.4 |
1485/985 |
93.0/91.0 |
0.86/0.80 |
100 |
1.5/1.5 |
7.5/7.0 |
|
YDT90S-4/8 |
1.00/0.22 |
2.5/1.0 |
1400/670 |
70.0/55.0 |
0.82/0.62 |
100 |
1.9/1.5 |
7.0/5.0 |
|
YDT90L-4/8 |
1.30/0.30 |
3.1/1.2 |
1400/670 |
72.0/58.0 |
0.82/0.63 |
75 |
1.9/1.5 |
7.0/5.0 |
|
YDT100L1-4/8 |
2.00/0.55 |
4.7/2.1 |
1420/690 |
80.0/65.0 |
0.80/0.61 |
75 |
1.9/1.5 |
7.0/5.0 |
|
YDT100L2-4/8 |
2.40/0.65 |
5.5/24 |
1420/690 |
80.0/66.0 |
0.81/0.61 |
78 |
1.9/1.5 |
7.0/5.0 |
|
YDT112M-4/8 |
3.20/0.90 |
7.4/3.3 |
1440/700 |
83.0/71.0 |
0.78/0.59 |
78 |
1.9/1.5 |
7.0/5.0 |
|
YDT132S-4/8 |
4.50/1.10 |
9.7/3.7 |
1450/715 |
84.0/75.0 |
0.82/0.59 |
82 |
2.0/1.2 |
7.0/5.0 |
|
YOT132M-4/8 |
6.30/1.50 |
13.2/4.9 |
1450/715 |
85.0/78.0 |
0.83/0.59 |
82 |
2.0/1.2 |
7.0/5.0 |
|
YDT160M-4/8 |
8.90/2.00 |
18.2/5.4 |
1440/720 |
85.0/82.0 |
0.85/0.67 |
82 |
2.0/1.2 |
7.0/5.0 |
|
YDT160L-4/8 |
12.00/2.70 |
23.5/6.9 |
1440/720 |
86.0/84.0 |
0.86/0.67 |
86 |
2.0/1.2 |
7.0/5.0 |
Technical date
|
Type |
Output(KW) |
Current (A) |
Speed (r/min) |
Efficiency (%) |
powor Factor (COSΦ) |
Noiseleve DB (A) |
locked Torqua Rated Torque |
Locirod Corrend Rated Currend |
|
YDT180M-4/8 |
16.00/4.00 |
31.8/10.9 |
1470/725 |
88.0/84.0 |
0.85/0.65 |
90 |
2.0/1.2 |
7.0/5.0 |
|
YDT180L-4/8 |
19.50/5.00 |
38.6/13.4 |
1470/725 |
89.0/85.0 |
0.85/0.66 |
2.0/1.2 |
7.0/5.0 |
|
|
YDT200L-4/8 |
29.00/7.50 |
56.8/19.6 |
1475/730 |
90.0/87.0 |
0.85/0.66 |
92 |
2.0/1.2 |
7.0/5.0 |
|
YDT225M-4/8 |
40.00/9.50 |
74.6/25.5 |
1475/735 |
91.0/88.0 |
0.88/0.64 |
94 |
2.0/1.3 |
7.5/5.0 |
|
YDT250M-4/8 |
52.00/14.50 |
97.3/37.0 |
1480/735 |
91.0/88.0 |
0.87/0.66 |
2.0/1.3 |
7.5/5.0 |
|
|
YDT280S-4/8 |
65.00/17.00 |
122.8/41.8 |
1485/735 |
91.0/89.0 |
0.87/0.68 |
98 |
2.0/1.3 |
7.5/5.0 |
|
YDT280M-4/8 |
75.00/18.50 |
137.4/43.9 |
1485/740 |
91.0/90.0 |
0.88/0.70 |
2.0/1.3 |
7.5/5.0 |
|
|
YDT315S-4/8 |
92.00/25.00 |
174.8/58.7 |
1485/740 |
91.0/90.0 |
0.86/0.70 |
100 |
2.0/1.3 |
7.5/5.0 |
|
YDT315M-4/8 |
110.00/30.00 |
208.3/70.1 |
1485/740 |
92.0/91.0 |
0.86/0.70 |
2.0/1.3 |
7.5/5.0 |
|
|
YDT315L2-4/8 |
135.00/36.00 |
253.3/84.0 |
1485/740 |
92.0/91.0 |
0.87/0.70 |
2.0/1.3 |
7.5/5.0 |
|
|
YDT315L2-4/8 |
155.00/41.00 |
288.0/94.7 |
1485/740 |
92.0/91.0 |
0.87/0.71 |
2.0/1.3 |
7.5/5.0 |
|
|
YDT90S-6/8 |
0.65/0.25 |
2.3/1.3 |
930/700 |
65.0/52.0 |
0.63/0.85 |
1.8/1.6 |
7.0/6.0 |
|
|
YDT90L-6/8 |
0.80/0.35 |
2.9/1.6 |
930/700 |
67.0/56.0 |
0.62/0.58 |
73 |
1.8/1.6 |
7.0/6.0 |
|
YDT100L1-6/8 |
1.30/0.55 |
4.1/2.3 |
950/700 |
71.0/62.0 |
0.66/0.58 |
1.8/1.6 |
7.0/6.0 |
|
|
YDT100L2-6/8 |
1.60/0.75 |
3.212.9 |
950/700 |
74.0/66.0 |
0.67/0.59 |
75 |
1.8/1.6 |
7.0/6.0 |
|
YDT112M-6/8 |
2.20/0.90 |
6.0/3.4 |
950/705 |
74.0/67.0 |
0.68/0.69 |
1.8/1.6 |
7.0 丨 6.0 |
|
|
YDT132S-6/8 |
2.60/1.20 |
6.9/4.1 |
960/720 |
79.0/73.0 |
0.71/0.60 |
79 |
1.8/1.6 |
7.0/6.0 |
|
YDT132M1-6/8 |
3.30/1.60 |
8.0/5.3 |
960/720 |
80.0/76.0 |
0.76/0.60 |
1.8/1.6 |
7.0/6.0 |
|
|
YDT132M2-6/8 |
4.50/2.20 |
11.0/7.1 |
960/720 |
82 0/77.0 |
0.75/0.60 |
1.8/1.6 |
7.0/6.0 |
|
|
YDT160M-6/8 |
6.50/3.20 |
14.9/9.5 |
970/725 |
84.0/80.0 |
0.76/0.61 |
83 |
1.8/1.6 |
7.0/6.0 |
|
YDT160L-6/8 |
9.00/4.50 |
20.3/13.0 |
970/725 |
86.0/82.0 |
0.77/0.62 |
86 |
1.8/1.6 |
7.0/6.0 |
|
YDT180L-6/8 |
13.00/6.50 |
26.0/15.1 |
970/725 |
66.0/81.0 |
0.77/0.65 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT200L1-6/8 |
17.00/8.50 |
35.5/20.6 |
970/730 |
87.0/82.0 |
0.80/0.66 |
88 |
1.5/1.5 |
7.0/6.0 |
|
YDT200L2-6/8 |
22.00/11.00 |
44.3/27.8 |
970/730 |
88.0/83.0 |
0.80/0.68 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT225M-6/8 |
30.00/15.00 |
62.3/32.2 |
980/730 |
89.0/87.0 |
0.83/0.78 |
92 |
1.5/1.5 |
7.0/6.0 |
|
YDT250M-6/8 |
37.00/18.00 |
72.1/38.5 |
980/735 |
90.0/87.0 |
0.86/0.60 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT280S-6/8 |
45.00/22.00 |
86.8/46.2 |
985/735 |
90.0/88.0 |
0.86/0.81 |
96 |
1.5/1.5 |
7.0 丨6.0 |
|
YDT280M1-6/8 |
55.00/28.00 |
104.7/57.2 |
985/735 |
91.0/89.0 |
0.82/0.81 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT280M2-6/8 |
65.00/32.00 |
122.0/66.6 |
985/735 |
91.0/89.0 |
0.82/0.81 |
100 |
1.5/1.5 |
7.0/6.0 |
|
YDT315S-6/8 |
75.00/37.00 |
145.1/40.4 |
985/735 |
91.0/90.0 |
0.84/0.78 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT315M-6/8 |
90.00/45.00 |
171.6/90.4 |
985/735 |
92.0/91.0 |
0.85/0.82 |
1.5/1.5 |
7.0/6.0 |
|
|
YDT315L1-6/8 |
110.00/55.00 |
209.5/115.7 |
985/735 |
92.0/91.0 |
0.85/0.78 |
82 |
1.5/1.5 |
7.0/6.0 |
|
YDT315L2-6/8 |
132.00/66.00 |
252.0/137.4 |
985/735 |
92.0/91.0 |
0.85/0.78 |
1.5/1.5 |
7.0 丨6.0 |
|
|
YDT112M-4/6/8 |
2.30/0.80/0.60 |
5.9/3.272.7 |
1455/960/7.5 |
79.0/65.0/61.0 |
0.73/0.57/0.53 |
2.0/1.7/1.3 |
7.5/6.5/4.0 |
|
|
YDT132S-4/6/8 |
3.10/1.10/0.80 |
7.1/3.9/3.1 |
1460/970/720 |
81.0/71.0/68.0 |
0.79/0.60/0.57 |
2.0/1.7/1.3 |
7.5/6.5/4.0 |
|
|
YDT132M-4/6/8 |
4.50/1.50/1.10 |
9.S/4.7/3.9 |
1460/970/720 |
83.0/74.0/72.0 |
0.82/0.65/0.57 |
2.0/1.7/1.3 |
7.5/6.5/4.0 |
|
|
YDT160M-4/6/8 |
7.50/2.60/1.50 |
16.0/7.3/4.8 |
1460/980/730 |
84.0/79.0/79.0 |
0.82/0.67/0.58 |
1.8/1.6/0.95 |
7.5/6.5/4.0 |
|
|
YDT160L-4/6/8 |
10.20/3.50/2.0 |
20.6/9.5/6.0 |
1460/980/730 |
86.0/81.0/81.0 |
0.85/0.68/0.60 |
86 |
1.8/1.6/0.95 |
7.5/6.5/4.0 |
|
YDT180M-4/6/8 |
13.00/4.50/2.60 |
24.2/10.6/7.7 |
1460/980/730 |
86.0/80.0/80.0 |
0.90/0.80/0.63 |
1.8/1.6/0.95 |
8.0/7.5/5.5 |
|
|
YDT180L-4/6/8 |
16.00/6.00/3.30 |
29.6/13.6/9.7 |
1460/980/730 |
87.0/81.0/81.0 |
0.90/0.81/0.63 |
90 |
1.8/1.6/0.95 |
8.0/7.5/5.5 |
|
YDT200L-4/6/8 |
22.00/8.00/4.50 |
40.6/17.8/13.2 |
1460/980/730 |
87.1/82.0/82.0 |
0.90/0.82/0.62 |
1.8/1.6/0.95 |
8.0/7.5/5.5 |
|
|
YDT225S-4/6/8 |
28.00/10.00/5.50 |
53.3/21.1/13.4 |
1470/980/740 |
89.0/83.0/85.0 |
0.88/0.85/0.70 |
92 |
1.8/1.7/1.1 |
8.0/7.5/5.5 |
|
YDT225M-4/6/8 |
34.00/12.00/7.50 |
63.1/24.7/17.2 |
1470/980/740 |
89.0/83.0/87.0 |
0.89/0.86/0.74 |
1.8/1.7/1.1 |
8.0/7.5/5.5 |
|
|
YDT250M-4/6/8 |
44.00/15.50/10.00 |
78.1/32.1/22.6 |
1475/985/740 |
90.0/85.0/88.0 |
0.92/0.85/0.75 |
1.8/1.7/1.1 |
8.0/7.5/5.5 |
|
|
YDT280S-4/6/8 |
55.00/18.00/12.00 |
98.5/37.0/27.3 |
1480/990/740 |
90.0/85.0/88.0 |
0.92/0.85/0.74 |
1.8/1.7/1.1 |
8.0/7.5/5.5 |
|
|
YDT280M-4/6/8 |
66.00/21.00/15.00 |
116.9/42.5/32.8 |
1480/990/740 |
91.0/86.0/89.0 |
0.92/0.86/0.76 |
94 |
1.8/1.7/1.1 |
8.0/7.5/5.5 |
|
YDT315S-4/6/8 |
75.00/27.00/19.00 |
136.0/55.3/43.8 |
1480/990/740 |
90.0/87.0/89.0 |
0.91/0.84/0.73 |
1.8/1.4/1.3 |
8.0/7.5/5.5 |
|
|
YDT315M4/6/0 |
90.00/32.00/22.00 |
162.0/64.8/50.6 |
1480/990/740 |
91.0/88.0/90.0 |
0.91/0.84/0.72 |
100
|
1.8/1.4/1.3 |
8.0/7.5/5.5 |
|
YDT315L1-4/6/8 |
115.00/40.00/28.00 |
204.2/79.7/62.5 |
1480/990/740 |
91.0/88.0/90.0 |
0.91/0.85/0.74 |
1.8/1.4/1.3 |
8.0/7.5/5.5 |
|
|
YDT3152-4/6/8 |
140.00/51.00/35.00 |
253.6/101.8/80.2 |
1480/990/740 |
92.0/89.0/91.0 |
0.90/0.84/0.72 |
1.8/1.4/1.3 |
8.0/7.5/5.5 |
ZHEJIANG QIZHI MOTOR CO., LTD. is a professional production of various kinds of small and medium-sized modern enterprise, the main products include ME2 series Grundfos high-efficiency aluminum motor, YDT series three-phase consequent-poles asynchronous motor, IE1 series three-phase asynchronous motor, IE2 series three-phase asynchronous motor, IE3 series super efficient three-phase asynchronous motor, YD series pole-changing multi-speed three phase asynchronous electric motor, YDT series three-phase consequent-poles asynchronous motor, YCT series electromagnetic speedregulating motor, MS series three-phase asynchronous motor with aluminium housing, YVF2 series three-phase frequency controlled asynchronous motor, YVF2 series of frequency conversion aluminum shell speed three-phase asynchronous motor, YEJ series electromagnetic braking three-phase asynchronous motor, YC/YCL series heavy-duty single-phase capacitors start induction motor, MLYL seriessingle-phase dual-capacitor induction motor, YYB Series pump for three-phase asynchronous motor, IRG/SW Single stage single pipette centrifugal pump, CDLICDLF stainless steel vertical multistage pump, etc. OEM YDT series three-phase consequent-poles asynchronous motor Factory
ZHEJIANG QIZHI MOTOR CO., LTD. depending on the talent for the enterprise development, with strong technology research and development team, has the industry's most advanced automated nc production equipment, advanced technology and equipment, usingadvanced design software for product design, perfect modern management system, strictly in accordance with "ISO-9001"national quality management system certification, production to make the success rate of new product development speed and improve, for the same industry leading level. As Custom YDT series three-phase consequent-poles asynchronous motor Suppliers, the company has advanced motor testing equipment, to guarantee product quality, won the domestic andforeign customers a wide range of trust and praise, the company through the Chinese CCC certification and CQC certification, ISO-
9001 international quality system certification, CE certification, SGS certification (ROHS), and obtained the national electrical products export quality license, with our continuously innovation in the face of the market; The products sell well all over the country and exported to southeast Asia, Germany, Italy, Poland, Britain, France, the Middle East, South America, Africa, Asia, etc. More than 80 countries and regions. In domestic widely used in air compressor, washing machine, water pump, fan, mechanical industry, reducer, such as the host.
We would like to more higher quality product, more lower preferential price, complete thoughtul pre-sale, sale, after-sale service, cooperate with friends from all walks of life, hand in hand advance together, altogether will create the glorious future.
Founded in
company area
Employees
Exported countries
Copyright © Zhejiang Qizhi Motor Co., Ltd.All Rights Reserved.
OEM YDT series three-phase consequent-poles asynchronous motor Suppliers
