Water systems handle different liquids, temperatures, flow requirements, and pressure conditions. A Stainless Steel Vertical Multistage Pump may be used in applications ranging from building water supply to industrial liquid transfer, but the fluid itself remains an important part of model selection.
Qizhi’s CDL/CDLF series is described for conveying media from tap water to industrial liquids. The product information distinguishes the two versions by liquid compatibility: CDL is intended for non-corrosive liquids, while CDLF is suitable for mildly corrosive liquids. This distinction gives equipment planners a practical starting point when reviewing the fluid handled by a system.
The liquid description should include its composition and operating temperature where known. A general label such as “industrial water” may not provide enough information to determine material suitability. For liquids containing chemical additives, the specific composition should be checked against the pump’s documented compatibility requirements.
The CDL and CDLF designations identify two versions within the same product series, but they should not be treated as interchangeable for every liquid. Qizhi identifies CDL for non-corrosive media and CDLF for mildly corrosive media. This difference is relevant to systems handling treated water, process liquids, or other fluids whose properties vary from ordinary tap water.
A Stainless Steel Vertical Multistage Pump used in a water supply system may handle a different medium from one installed in an industrial process. The appropriate version depends on the actual fluid and the manufacturer’s specifications, not solely on the industry or equipment name.
The product page does not provide a detailed chemical compatibility chart or a stainless steel grade for every model. Projects involving specific acids, alkalis, or chemical mixtures should therefore confirm compatibility with the manufacturer before finalizing the pump specification.

Qizhi lists water plant filtration and transfer, water distribution, main-pipe pressurization, and high-rise building water supply among the series’ uses. These applications share a need to move water through a defined system, but their flow and pressure requirements can differ.
In a building, the pump duty may relate to the height and layout of the water distribution network. In a water plant, the system may involve transfer between treatment or storage stages. Each case calls for a review of the required flow and head rather than selecting a model based only on the general application.
The CDL/CDLF product table provides model-specific flow and head data. For example, the listed CDL(F)2-2 model has a motor power of 0.37 kW, with head values varying across the stated flow points. The table should be read by matching the required flow to the corresponding head value, rather than treating the maximum listed head as available at every flow.
The series is also listed for process water, cleaning systems, high-pressure flushing, fire protection, cooling and air-conditioning systems, boiler feed water, and condensation systems. These uses involve different operating conditions, so the same pump designation does not automatically establish suitability for every installation.
For industrial liquid transfer, the fluid’s characteristics and required operating point should be reviewed together. A Stainless Steel Vertical Multistage Pump may be considered for a system where the specified model’s flow, head, and material compatibility match the duty. If the liquid contains corrosive components, the CDL or CDLF version should be selected only after confirming the fluid falls within its stated application range.
The product information also names machine tools, ultrafiltration, reverse osmosis, distillation, separators, and swimming pools as applications. These examples show the range of systems in which the series may be considered, while final model selection remains dependent on the actual process requirements.
Qizhi lists field irrigation, sprinkler irrigation, and drip irrigation among the product’s applications. These systems differ in how water is distributed. Field irrigation may serve broad areas, sprinkler systems deliver water through spray devices, and drip irrigation directs water through localized outlets.
The required flow and pressure depend on the layout, number of outlets, pipe dimensions, and operating schedule. The pump should be evaluated against the system’s calculated duty rather than chosen only by the irrigation method. A Stainless Steel Vertical Multistage Pump selected for one irrigation arrangement may not match another with different flow or elevation requirements.
The model table provides a basis for comparing listed flow and head combinations. System designers should use the specific model data and project calculations to confirm the operating point.
A useful pump specification records the liquid, required flow, required head, motor power, and installation application. For chemical or treated liquids, it should also identify the fluid composition and any compatibility questions requiring confirmation.
Qizhi’s CDL/CDLF series covers multiple model configurations and application areas. Its product information distinguishes the versions by their stated suitability for non-corrosive and mildly corrosive liquids, while the technical table provides model-level flow and head values.
For distributors, contractors, and equipment designers, keeping these details together helps connect the selected pump with its intended system. The Stainless Steel Vertical Multistage Pump should be specified by its exact model and operating requirements, with fluid compatibility confirmed before procurement.